NPM-TT2

Various production types are supported through high-speed and highly efficient mounting of odd-form components.

View full specifications Share page

Key features of NPM-TT2

Key features

Direct connectivity with NPM-D3 / W2

Placement heads (lightweight 8-nozzle head, 3-nozzle head V2)

Selectable and configurable supply unit specifications

Adoption of multi-mode recognition camera

Alternate and independent mounting support

Features and Benefits of “Production Modular NPM-TT2”

High-speed and highly efficient placement of odd-form components is achieved by arranging the tray feeders at front/rear, thus contributing to total productivity improvement

Suitable for “medium to large lot production” and “on-vehicle repair components” that cannot have common arrays
Independent mounting of tray components is achieved by directly linking NPM-TT2 with NPM-DX/D3/W2 dual lane specification!

Features and Benefits of “Production Modular NPM-TT2”

High-speed and highly efficient placement of odd-form components is achieved by arranging the tray feeders at front/rear, thus contributing to total productivity improvement

Non-stop line setup with independent mounting

Suitable for “medium to large lot production” and “on-vehicle repair components” that cannot have common arrays
Independent mounting of tray components is achieved by directly linking NPM-TT2 with NPM-DX/D3/W2 dual lane specification!

Easy switching between tray feeder and 17-slot feeder cart

Specifications of NPM-TT2

Specifications table

Model Number	NM-EJM1E
PCB dimensions (mm)	PC size Single-lane mode: L 50 mm × W50 mm to L 510 mm × W 590 mm Dual-lane mode: L 50 mm × W50 mm to L 510 mm × W 300 mm M size Single-lane mode: L 50 mm × W50 mm to L 510 mm × W 510 mm Dual-lane mode: L 50 mm × W50 mm to L 510 mm × W 260 mm
PCB exchange	Single-lane mode: 4.0 s ( With no component mounted on the reverse side of PCB ) Dual-lane mode: 0 s (No 0s when cycle time is 4.0 s or less)
Electric Source	3-phase AC 200 , 220 , 380 , 400 , 420 , 480 V 2.5 kVA
Pneumatic Source	Min.0.5 MPa、200 L / min ( A.N.R. ) (Only for main body)
Dimension	W 1 300 mm × D 2 798 mm × H 1 444 mm Note：Machine dimensions and mass for standard configuration ( NPM-TT2 and Tray feeder x 2 ). They differ depending on the optional configuration. W 1 300 mm × D 2 781 mm × H 1 444 mm 　　 Note：Dimensions and mass of the machine and two ASF carts ( 34-slot ). They differ depending on the optional configuration.
Mass	3 090 kg Note：Machine dimensions and mass for standard configuration ( NPM-TT2 and Tray feeder x 2 ). They differ depending on the optional configuration. 2 880 kg Note：Dimensions and mass of the machine and two ASF carts ( 34-slot ). They differ depending on the optional configuration.
Placement Head	Lightweight 8-nozzle head 3-nozzle head V2

View full specifications Download full specifications

Model Number	NM-EJM1E
PCB dimensions (mm)	PC sizeSingle-lane mode: L 50 mm × W50 mm to L 510 mm × W 590 mmDual-lane mode: L 50 mm × W50 mm to L 510 mm × W 300 mmM sizeSingle-lane mode: L 50 mm × W50 mm to L 510 mm × W 510 mmDual-lane mode: L 50 mm × W50 mm to L 510 mm × W 260 mm
PCB exchange	Single-lane mode: 4.0 s ( With no component mounted on the reverse side of PCB )Dual-lane mode: 0 s (No 0s when cycle time is 4.0 s or less)
Electric Source	3-phase AC 200 , 220 , 380 , 400 , 420 , 480 V 2.5 kVA
Pneumatic Source	Min.0.5 MPa、200 L / min ( A.N.R. ) (Only for main body)
Dimension	W 1 300 mm × D 2 798 mm × H 1 444 mm Note：Machine dimensions and mass for standard configuration( NPM-TT2 and Tray feeder x 2 ).They differ depending on the optional configuration.W 1 300 mm × D 2 781 mm × H 1 444 mm 　　Note：Dimensions and mass of the machine andtwo ASF carts ( 34-slot ).They differ depending on the optional configuration.
Mass	3 090 kgNote：Machine dimensions and mass for standard configuration( NPM-TT2 and Tray feeder x 2 ).They differ depending on the optional configuration.2 880 kgNote：Dimensions and mass of the machine andtwo ASF carts ( 34-slot ).They differ depending on the optional configuration.
Placement Head	Lightweight 8-nozzle head 3-nozzle head V2
Stick	Max.28 ( Single stick feeder )
Tray	Max.40
Placement Head max Speed	PC sizeLightweight 8-nozzle head ( Per head ): 18 000 cph ( 0.20 s / chip )3-nozzle head V2 ( Per head ): 7 200 cph( 0.50 s / chip ) 5 900 cph ( 0.61 s / QFP )* at optimum conditionsM sizeLightweight 8-nozzle head ( Per head ): 17 460 cph ( 0.21 s / chip )3-nozzle head V2 ( Per head ) : 6 984 cph ( 0.52 s / chip ) 5 723 cph ( 0.63 s / QFP )* at optimum conditions
Placement Head Placement Accuracy (Cpk≧1)	Lightweight 8-nozzle head : ±40 μm / chip±30 μm / QFP* at optimum conditions3-nozzle head V2: ±40 μm / chip±30 μm / QFP* at optimum conditions
Placement Head Component Dimensions (mm)	Lightweight 8-nozzle head : 0402 chip to L 45 × W 45 × T 12or L 100 × W 40 × T 123-nozzle head V2: 0603 chip to L 120 × W 90 × T 30 or L 150 × W 25 × T 30or L 135 × W 135 × T 13 (□135 mm is option.)
Component Supply Taping	Lightweight 8-nozzle head : Tape：4 / 8 / 12 / 16 / 24 / 32 / 44 / 56 / 72 mm3-nozzle head V2: Tape：4 to 72 / 88 / 104 mm