Proyector de 1 chip DLP™ de óptica fija con resolución True 4K

PT-FRQ60

El proyector PT-FRQ60 1-Chip DLP™ 4K de 6.000 lm ofrece imágenes nítidas y precisas para una experiencia visual intensa

Ver especificaciones completas Share Pagina

Principales Características

Proyector láser de 1 chip DLP™, brillo de 6.000lm

Resolución de salida 4K (3840 x 2160), ideal para exposiciones de museos, educación y oficinas corporativas

Óptica zoom 2.0x y desplazamiento de la óptica V/H gran angular (V: +71 %, -48 %, H: +34 %, -27 %)

Kit de actualización preactivado para Geometry Manager Pro

Admite alta velocidad de fotogramas de 240Hz/1080p con latencia mínima de entrada a salida

El proyector PT-FRQ60 1-Chip DLP™ 4K de 6.000 lm ofrece imágenes nítidas y precisas para una experiencia visual intensa

TIPO DE PROYECTOR	PROYECTORES LÁSER DLP™ DE 1 CHIP
MODELO	PT-FRQ50	PT-FRQ60
BRILLO	5.200 lm	6.000 lm
RESOLUCIÓN	4K (3840 x 2160 píxeles)	4K (3840 x 2160 píxeles)

Calidad de imagen 4K nítida y detallada

Quad Pixel Drive crea imágenes 4K nítidas y detalladas con Rich Color Enhancer consiguiendo colores vivos y precisos. El procesamiento de alta velocidad admite velocidades de fotogramas de 240 Hz/1080p con una latencia de 8 ms o menos para imágenes nítidas y sin cuadrícula.

Flexible, fácil de usar y fácil de integrar

V/H Lens-Shift y zoom 2.0x mejoran la flexibilidad de instalación, mientras que dos entradas HDMI® compatibles con CEC y DIGITAL LINK se integran en la infraestructura 4K. Los kits de actualización preactivados para Geo Pro y Remote Preview Lite garantizan una experiencia 4K sin esfuerzo.

Proyección de alta fiabilidad y bajo mantenimiento

El sistema de refrigeración basado en conductos térmicos sin filtro y el bloque óptico sellado herméticamente permite una proyección sin necesidad de mantenimiento de 20.000 horas. Las funciones opcionales de alerta temprana agilizan la gestión y mejoran la fiabilidad en museos, aulas y oficinas.

Galería de productos

Descargar

Tabla de especificaciones

Projector type	1-Chip DLP™ projector
DLP™ Chip \| Panel Size	16.5 mm (0.65 in) diagonal (16:9 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 1, DLP™ projection system
DLP™ chip \| Number of Pixels*1	1920 x 1080 pixels (If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution.)
Light Source	Laser diodes
Light output 2 3	6,000 lm / 6,200 lm (Center)*4
Time until light output declines to 50 %*5	20,000 hours (NORMAL/QUIET)/24,000 hours (ECO)
Resolución	4K (3840 x 2160 pixels) (With Quad Pixel Drive)

Ver especificaciones completas

Recursos relacionados

View in Downloads

Panasonic PROJECTORS Quick Reference Guide

Descargar

PT-FRQ60/FRQ50 Operating Instruction (English)

Descargar

PT-FRQ60 RS-232C control spec (English/Japanese/Chinese)

Descargar

PT-FRQ60 White Top High-res

Descargar

PT-FRQ60 White Front High-res

Descargar

PT-FRQ60 White Slant Right High-res

Descargar

PT-FRQ60 White Slant Left High-res

Descargar

PT-FRQ60 Spec File (English)

Descargar

PT-FRQ60 CAD PDF

Descargar

Sorry there was an error...
The files you selected could not be downloaded as they do not exist.

You selected items.
Continue to select additional items or download selected items together as a zip file.

You selected 1 item.
Continue to select additional items or download the selected item directly.

Download selected file

Projector type	1-Chip DLP™ projector
DLP™ Chip \| Panel Size	16.5 mm (0.65 in) diagonal (16:9 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 1, DLP™ projection system
DLP™ chip \| Number of Pixels*1	1920 x 1080 pixels (If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution.)
Light Source	Laser diodes
Light output 2 3	6,000 lm / 6,200 lm (Center)*4
Time until light output declines to 50 %*5	20,000 hours (NORMAL/QUIET)/24,000 hours (ECO)
Resolución	4K (3840 x 2160 pixels) (With Quad Pixel Drive)
Contrast Ratio*2	20,000:1 (Full On/Full O) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1]. HDMI signal input)
Screen Size (Diagonal)	1.02–7.62 m (40–300 in), 16:9 aspect ratio
Center-to-corner zone ratio*2	90 %
Lens	2.0x manual zoom (throw ratio: 1.46–2.93:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm
Lens shift \| Vertical(From the origin point of the lens mounter)	+71 %, -48 % (manual)
Lens shift \| Horizontal(From the origin point of the lens mounter)	+34 %, -27 % (manual)
Keystone Correction Range	Vertical: ±40 °, Horizontal: ±20 °
Instalación	Ceiling/floor, front/rear, free 360-degree installation
Terminals \| HDMI IN 1/2	HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input6), CEC supported
Terminals \| Computer In	D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
Terminals \| Monitor Out	D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
Terminals \| Audio In/Out	M3 stereo mini-jack x 2
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| DIGITAL LINK/LAN	RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2],Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input*7)
Terminals \| LAN	RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
Terminals \| USB	USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory, and for power supply (DC 5 V, maximum 2 A)
Power Supply	AC 100–240 V, 50/60 Hz; AC 110 V, 60 Hz (Taiwan)
Power Consumption	505 W
Cabinet Materials	Molded plastic
Operation Noise*2	36 dB (NORMAL/ECO) / 31 dB (QUIET)
Dimensions (W x H x D)*8	498 x 168 x 492 mm (19 5/8˝ x 6 5/8˝ x 19 3/8˝ )
Weight*9	Approx. 16.4 kg (36.2 lbs)
Operating Environment	Operating temperature: 0–45 °C (32–113 °F)*10, operating humidity: 10–80 % (no condensation)
Applicable Software	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro*11
Note	1 If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution. 2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. 3 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. 4 Average light-output value of all shipped products measured at center of screen in NORMAL Mode. 5 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3of particulate matter). Estimated time until light output declines to 50 % varies depending on environment. 6 4K/60p signals are converted to the projector's resolution upon projection. 7 4K/60p signal input is converted to projector's resolution, supports YPBPR4:2:0 format only. 8 With legs fully retracted. 9 Average value. May dier depending on the actual unit. 10 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 35 °C (95 °F) or higher, the light output may be reduced to protect the projector. When optional AJ-WM50 Series Wireless Module is attached, operating temperature range becomes 0–40 °C (32–104 °F). *11 Some features only available after August 2022.