Placement
NPM-DX
High placement quality and high throughput are the characteristics of Panasonic’s NPM-DX, the next generation of smart pick and place equipment.
Key features of NPM-DX
Key features
| 92 400 cph and feeding with up to 136 reels |
| Ready for line automatization |
| Available APC system |
| Integrated floor management |
| Lowest total cost of ownership (TCO) with maintenance services |
Specifications of NPM-DX
Specifications table
| Model Number | NPM-DX |
|---|---|
| PCB dimensions (mm) | Single-lane mode: L 50 × W 50 ~ L 510 × W 590 Dual-lane mode: L 50 × W 50 ~ L 510 × W 300 *When the long spec. conveyor is selected |
| PCB exchange | 2.1 s ( L 275 mm or less); 4.8 s ( L 275 mm or over to L 460 mm or less) *May differ depending on PCB specifications. *When the short spec. conveyor is selected |
| Electric Source | 3-phase AC 200, 220, 380, 400, 420, 480 V 5.0 kVA |
| Pneumatic Source | Min.0.5 MPa、200 L /min (A.N.R.) |
| Placement Head max Speed | Lightweight 16-nozzle head V2 (Per head): 46 200 cph (0.078 s/ chip) Lightweight 8-nozzle head (Per head): 24 000 cph (0.150 s/ chip) 4-nozzle head (Per head): 8 500 cph (0.424 s/ chip) 8 000 cph (0.450 s/ QFP) |
| Placement Head Placement Accuracy (Cpk≧1) | Lightweight 16-nozzle head V2 (Per head): ±25 μm/Square chip Lightweight 8-nozzle head (Per head): ±25 μm/ Square chip; ±40 μm/QFP □12 mm Under; ±25 μm/QFP □12 mm to □32 mm 4-nozzle head (Per head): ±20 μm/ QFP |
| Placement Head Component Dimensions (mm) | Lightweight 16-nozzle head V2 (Per head): 0201 component / 03015 component; 0402 component to L 6 x W 6 x T 3 Lightweight 8-nozzle head (Per head): 0402 component ~L 45 x W 45 or L 100 x W 40 x T 12 4-nozzle head (Per head): 0603 chip ~ L 120 x W 90 or L 150 x W 25 x T 30 |
Share page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: